The Server Technology® Switched PDU provides control of outlet power and local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPS® technology provides accurate measurement of current (billing-grade), voltage, active power, apparent power, power factor, crest factor, and accumulated energy at the input. These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The Switched “Master” PDU can be connected to a Switched “Link” PDU to extend the network access to the redundant or secondary power feed.
Switched STV-4102 3.3kW - 7.3kW (24) C13 outlets |
Family Specifications |
Branch Monitoring: | Sense | Power Pivot Input: | Yes |
Branch Overcurrent Protection: | 5 kAIC | Product Height (inch): | 69.0 |
Branch Overcurrent Protection Type: | Circuit Breaker: 2-pole | Product Height (mm): | 1753 |
Dual Input: | No | Product Max Depth (inch): | 2.25 |
High Retention Outlets: | Yes | Product Max Depth (mm): | 58 |
Input Current Display: | Auto-Orient | Product Nominal Depth (inch): | 2.25 |
Input Monitoring: | PIPS | Product Nominal Depth (mm): | 58 |
Locking Outlets: | Yes | Product Width (inch): | 1.75 |
Max Operating Temperature: | 60 °C | Product Width (mm): | 45 |
Fast Movers: | Yes | ||
Mounting: | 0U Vertical | ||
Outlet Monitoring: | None | ||
PDU Platform: | CDU1 |
Product Specifications |
STV-4102K (SWITCHED) DOWNLOAD DATASHEET |
Input Power Capacity (kW): | 7.3 |
Input Plug Type: | IEC 230V/32A 2P+PE 6Hr |
Input Current (A): | 32 |
Input Current Rated (A): | 32 |
Input Nominal Voltage (V): | 230 |
Input Phase: | 1-Phase (L-N) |
Input Cord Location: | Bottom/Pivot |
Outlet Form Factor: | Conventional |
Total Outlets: | 24 |
IEC C13 Count: | 24 |
Utility Outlet: | 0 |
STV-4102J (SWITCHED) DOWNLOAD DATASHEET |
Input Power Capacity (kW): | 3.6 |
Input Plug Type: | IEC 230V/16A 2P+PE 6Hr |
Input Current (A): | 16 |
Input Current Rated (A): | 16 |
Input Nominal Voltage (V): | 230 |
Input Phase: | 1-Phase (L-N) |
Input Cord Location: | Bottom/Pivot |
Outlet Form Factor: | Conventional |
Total Outlets: | 24 |
IEC C13 Count: | 24 |
Utility Outlet: | 0 |
STV-4102M (SWITCHED) DOWNLOAD DATASHEET |
Input Power Capacity (kW): | 7.3 |
Input Plug Type: | 230V Clipsal 56P332 |
Input Current (A): | 32 |
Input Current Rated (A): | 32 |
Input Nominal Voltage (V): | 230 |
Input Phase: | 1-Phase (L-N) |
Input Cord Location: | Bottom/Pivot |
Outlet Form Factor: | Conventional |
Total Outlets: | 24 |
IEC C13 Count: | 24 |
Utility Outlet: | 0 |
Drawings |
Design Diagram - DD 412-0771-2
Wiring Diagram - WD 495-0958-2
Documents |
Firmware
Manual
Application Notes
AN PRO2-001: How do I maximize uptime using power data from the equipment cabinet?
AN PRO2-002: How do I use a cabinet PDU to help manage equipment deployment?
AN SPM-001: How do I leverage cabinet PDU information to help plan for growth?
Technical Notes
TN - About "Bluetooth Ready" (303-9999-40)
TN - CDU Firmware Upgrade Instructions (303-9999-35)
TN - CDU Security (303-9999-12)
TN - Introducing PRO1 (303-9999-41)
TN - Using LDAP with Sentry Firmware and Sentry Power Manager (SPM) (303-9999-30)
TN - Using StartUp Stick for CDU Mass Configuration (303-9999-34)
White Papers
WP - Advances in Power and Environmental Monitoring for Increasing Efficiency in the Data Center
WP - Bottom-Up Data Center Power Management
WP - Managing variable data center rack densities
WP - Mission Critical - Rack Power Distribution
WP - Power Distribution as a System within the High-Density Data Center
WP - The Practical Science of Data Center Capacity Planning
Compliance
Warranty